CUSTOM ORDER 

CALL OR EMAIL THE SHOP FOR A QUOTE 

THE AIR SUPPLY AND CONTROL 

• Viair Compressor and Wiring
• AR Compressor Wiring 
• 5 Gallon Air Tank
• Fittings to Suit Air Tank
• Valve Block 
• Valve Block Fittings
• Airline 
• Control System  

• Removes bulky, heavy, poor handling twin I-beam suspension
• Bolt-in cradle is super strong and strengthens the front of the truck while providing structural mounts front control arms – utilizes substantial “H” style design compared to other “I” style crossmembers.
• Superb suspension geometry, built without compromise – vastly superior to adapted salvage yard “Crown-Vic suspension swaps” or “street rod style” / Mustang II front systems with optimized roll centers and anti-dive.
• Delrin bushings on upper and lower control arms provide smooth, squeak-free long life
• Upper control arm cross shaft allows for easy alignment and use of caster slugs
• Adjustable steering stop on lower control arm
• Utilizes Ridetech tall spindle which uses “AFX brake kits” – many of the kits (Wilwood) are dual drilled for 5 x 4.5″ or 5 x 4.75″ lug pattern.
• Brake kit for the stock 5 x 5.5″ lug pattern coming soon. 
• Increased camber gain with tall spindle, 5-8 degree’s caster for improved high speed stability
• 63.5” in front width (wheel mount surface to wheel mount surface) – provides options for “traditional” offset wheel choices (4″ narrower than Crown Vic)
• Fits 14 inch and larger wheels. If using more than 4.5″ of backspacing,18″ wheels are required.
• Motor mount “loops” connect cradle to frame rails to reinforce frame 
• Motor mounts options for Modular Ford, Ford FE, and Small Block Ford, Chevy LS / Small Block / Big Block
• Front sway bar measures 1.5″ x .250 wall and provides confident cornering and smooth ride
• Adjustable bump stops 
• Rack and pinion steering conversion with 15.5” center to center bushing mounts for 79-93 Mustang style steering rack
• Includes billet adjustable tie rods
• Bump steer has been virtually eliminated
• Adaptable to stock steering column using kit 12319505, includes column adapter, U-Joint and shaft. 
• High quality satin black powder coat finish
• Entire system saves approximately 130lbs. from the front of the truck. 

• Removes factory leaf spring suspension and bracketry
• Complete parallel 4-link with panhard and c-notches
• Works with Coilover or Shockwaves Air Suspension
• Includes R-Joints on all links for smooth, bind free, quite operation and long life
• Optimized roll center and anti-squat (60% anti-dive) for amazing traction and elimination of wheel hop
• High quality satin black powder coat finish
• Reduces rear weight by 50 lbs
• 1965-1972 – No bed modification needed
• 1973-1979 – Slight bed support rail modification needed (not visible from the top side of the truck